New! A keyless window safety lock yet it is the safest to use!
Griloc Window Lock
Hassle free window safety lock that saves you trouble to look for a key to open a sliding window grille during emergency
...even during fire!
Griloc window lock is a keyless window lock that allows you to open your sliding window grille immediately during emergency like fire. Unlike other window locks, Griloc window lock is keyless - even a small kid can open it just by pulling a locking pin!
Griloc Window Lock
SPECIFICATION & OPERATING MANUAL
1. Anatomy
The Griloc window lock consists of top case, lever, vertical shaft casing, vertical shaft, bottom case, locking pin and locking pin housing case.
Please download our Installation Manual at http://www.window-safety-lock.com/ixora.pdf for clear picture and diagram.
2. Specification
Materials : Aluminium alloy ADC 12 (verticle shaft casing, vertical shaft)
Copper (lever, locking pin)
pvc (locking pin housing case)
Weight : approx. 650 gram
Length : approx. 610 mm
Characteristics : rust free, maintenance free
Usage : Only for sliding type of window grille
3. How Griloc window lock works
To lock
Push the lever to block the sliding window grille.
Push the vertical shaft upwards at the bottom case until the locking pin can be pushed into the hole at the opposite side of the bottom case. See figure.
Close the locking pin housing case.
To open
Open the locking pin housing case.
Pull the locking pin so that the vertical shaft drops by gravity. See figure.
Pull the sliding window grille open.
4. How to install Griloc window lock
Please download our Installation Manual at http://www.window-safety-lock.com/ixora.pdf.
The Griloc window lock is only suitable for sliding type of window grille.
If you have not installed any window grille or when you buy a new house without window grille, you may instruct your grille supplier to install Griloc window lock by following the steps enshrined below.
If you have already installed a conventional type of sliding window grille which uses padlock or a fixed type window grille, you may have to take down the existing window grille and modify it before you can install Griloc window lock.
The conventional sliding window grille is installed with U-channel placed on top of the window sill. See figure.
Contrary to the conventional sliding window grille, for installation of Griloc window lock, the U-channel has to be at the inner side away from the window sill. See figure.
You have to extend the window grille by at least 20mm from the edge of the window sill to accommodate the Griloc window lock.
Kindly take note that:-
a. The window grille for Griloc window lock installation is at least 20mm longer than the conventional one.
b. As the U-channel is at the inner side, the thickness of the frame of window grille has to be the thickness of two (double) box channel (20mm x 20mm) with a flat plate mounting on the wall. The total thickness is about 50mm. Of course the two box channels and flat plat have to be welded together. For your information, the thickness of top case and bottom case is 22mm.
You will have no hassle and may sleep well after installation!
Good luck!
For advertisement and free link exchange, visit : http://www.howtomendit.com.
Go to Top